Troubleshooting and Analysis of Wireless Signal Jammer Systems

Wireless signal jammer systems are usually installed in schools, prisons, large conference centers and other places, because when these units block mobile phone signals, they need to cover a very large area and also involve the shielding of multiple buildings and rooms. Using cellular networks for signal coverage requires a large number of shielding equipment terminals. It is common for such units to install dozens or even hundreds of shielding devices. So how to troubleshoot and analyze the shielding equipment after using the shielding system?

1. The manufacturer of the shielding system will provide standardized guidance documents, and will require maintenance personnel of customers or agents to regularly inspect the system in accordance with the requirements of the guidance documents, and register and feedback the inspection results.

2. Maintenance personnel can quickly query the working status and fault conditions of each mobile phone signal shielding terminal in the system through the wireless signal jammer system main control software.

3. The status query of the signal shielding terminal should at least include: the remote startup, shutdown, power adjustment and other functions of the equipment can quickly respond, and the switch control or power adjustment of each shielding module in the equipment can be performed.

The above status query should be applicable to each shielding point in the entire wireless signal jammer system. After the shielding point inspection is completed, a complete maintenance report will be obtained. From the report, it becomes clear where the shielding equipment failed. What maintenance personnel need to be reminded here is that the fault point detected by the shielding system main control software can complete normal network communication with the shielding terminal. In fact, there may be another possibility, that is, a network failure occurs between the partially shielded terminal and the main control server, causing the main control software to be unable to complete the delivery and upload of terminal data. When encountering such problems, a special network communication interruption prompt message will appear on the main control software. What maintenance personnel need to troubleshoot and solve is to solve the problem of smooth network transmission.