What is the appropriate installation height for a high-power UAV signal jammer?
Some important military departments or confidential places have chosen our high-power UAV signal jammer because of its wide coverage and effective defense radius of several kilometers against illegally intruding UAVs. During the installation process of the equipment, a customer asked us what is the appropriate installation height for this high-power drone signal jammer? Is it better to install it in a higher position? Can it be installed directly on the roof of a building?
If the desired purpose is to maximize the anti-UAV jamming signal range, then a more reasonable measure is to increase the installation height of the UAV signal jammer as much as possible, or to raise the erection height of the transmitting antenna as high as possible. The better, because only if the height of the antenna is high enough, the interference signal emitted by it will not be blocked by other obstacles when it is emitted to cover the surroundings, thereby causing signal attenuation, or reflection and refraction. The obstacles mentioned here will have varying degrees of impact on the attenuation of interference signals due to their different types and materials. Common metal plates, multi-layer brick-concrete and steel-concrete, etc. that are common in life have the greatest attenuation of interference signals. Therefore, our recommendation is that if conditions permit, the optimal installation height of the UAV signal jammer is higher than All buildings surrounding it.
To install the drone signal jammer higher than all surrounding buildings, there are two installation methods to choose from. The first is to directly use the top of the floor of the tallest building. You only need to install a pole of a few meters on the roof. The installation can be completed quickly. Another way is to first install a pole of sufficient height on the ground, similar to a street light pole or a signal tower pole. The high-power UAV signal jammer needs to be installed stably and reliably at the upper end of the vertical pole.
However, we need to remind you that when pole installation is used, the host and antenna of the UAV signal jammer must take protective measures such as reliable power supply grounding, equipment waterproofing, and antenna lightning protection. In addition, due to the heavy weight of the equipment itself, it must be stable when installing the equipment. If necessary, a crane or hoist should be equipped at the installation site to ensure the smooth progress of the installation process.
