Explanation of the advantages and disadvantages of common equipment installation of signal jammers

It is inconvenient to open and close in a unified way:

When there are too many mobile phone signal jammers, especially after multiple buildings in the prison area are shielded, it is difficult to turn on and off in a centralized and unified manner; even if the power cords are arranged uniformly, a special person is required to be responsible for turning on and off on time;

Unable to know the working status and failure of the jammer:

After all mobile phone signal jammers are activated, the management personnel cannot immediately know which points of the jammers are working properly;

Not energy-saving and environmentally friendly, not conducive to equipment maintenance:

In general, keeping all shields in an open state for many years is not conducive to energy conservation, environmental protection, equipment maintenance, and shortening the service life of equipment (such as factory areas, canteens, warehouses, etc., are unmanned at night, and there is no need to place these locations. The mobile phone jammer is continuously powered on and running 24 hours a day);

Inconvenient group control or point-to-point control:

Unable to accurately group or point-to-point timing switch control;

The phenomenon of deliberate destruction of the shielding device cannot be prevented:

Managers cannot immediately determine and learn about the intentional damage of prisoners or prison guards, cutting off the power supply, etc. that affect the normal operation and use of mobile phone jammers;

The process of manually turning off the blocker cannot be traced and checked:

It is impossible to track and investigate the more obvious vandalism of prisoners or prison guards (for example: some prison guards cut off the power supply of the jammer without supervision at night, and restore the normal power supply of the jammer the next morning).

Advantages of installing mobile phone shielding network intelligent management system

There is no need to arrange control lines, and the installation and construction are simpler:

The whole system takes the power carrier as the technical core, and does not require centralized wiring (the power cord for the shielding device does not need to be centralized wiring), and there is no need for wiring between the shields or between the shields and the host computer. Each shielding point is only You need to get electricity nearby (the power cord that supplies power to the shield is used not only for power supply, but also for transmitting remote control signals).

The software is unified and centralized control and management, and the electronic map is simple and clear:

The entire system is controlled and managed by a set of main control software, and managers can see the shielding status in the surveillance area at a glance through the unit structure diagram (equivalent to the unit electronic map) on the main control software.

Free grouping, can be fully open, fully closed, can be grouped (buildings, sub-regions) switch, point-to-point switch:

Managers can accurately control the on and off of any shielding point through the main control software on the main control computer, point-to-point or grouped (that is, sub-regional or sub-building);

Master the operating status and failure of all points, real-time query and automatic query, automatic alarm:

Managers can manually or automatically inquire the working status of each mobile phone shielding device, and can find out the malfunctioning or damaged shielding device in real time. Under the automatic inquiry state, it can provide instant sound and light alarm for the malfunctioning shielding point and make it clear Inform the location of the shield;

Time switch, time plan can be edited arbitrarily, energy saving and environmental protection:

The software can be used to perform precise timing on and off control for any point or group; after the timing is activated for some positions that do not need to be continuously turned on for many years, it is beneficial to energy saving, environmental protection, and prolonging the service life of the equipment;

The log function helps to track and troubleshoot:

The complete system log function will record the working status of each jammer, the operation log of the administrator or operator, and it has tracking and troubleshooting functions for those more sophisticated sabotages (for example, a prison guard cuts off the jammer at night , After the power supply is restored during the day, this process will be automatically queried and recorded in the log).

Expandable functions in the future: multi-level networking, data aggregation, mastering the overall situation:

This item is an expandable development function in the future and has not yet been put into application: since each of this system has an independent database, if there are more than one in the province, the upper management department can call the database of each prison in the future. To supervise the operation of the shielding system of each prison.