UAV detection and countermeasure system receives detection information in real time

The UAV detection and countermeasure system (or UAV monitoring, early warning, prevention and control system) is to measure the direction of the UAV's image transmission signal and the direction of the remote Remote control detection. When the drone or remote control enters the area, an alarm is issued and the operator is warned. The operator can choose to Jamming device for forced landing or forcibly drive away the drone.

The UAV detection and countermeasure system does not limit the detection range. Usually its detection range is equal to the available distance between the UAV and the remote control. It generally depends on the transmission power of the UAV/remote control. A single device can It can detect the range of more than 10 kilometers alone; if multiple devices are set up for networking, the coverage can be expanded indefinitely.

Compared with the current similar products, it has the advantages of small size, light weight, low power consumption, and multi-functions such as direction finding, monitoring and suppression, which can meet multiple purposes and realize multiple tactics. The system operating software has comprehensive functions, friendly interface, simple operation and convenient use. At the same time, the UAV detection and countermeasure system can be further optimized and perfected according to on-site operations and actual combat needs.

Tactical indicators of detection system

1. Monitoring frequency range

2.4GHz～6GHz, can be expanded to full coverage from 30MHz to 6GHz as needed. (The most complete domestic frequency)

2. Direction finding distance (customize different antenna front ends and processing chips according to requirements

2.4GHz UAV direction finding distance: ≥2000m, ≥5000m, ≥10000m (three options are available)

5.8GHz UAV direction finding distance: ≥2000m, ≥5000m, ≥10000m (three options are available).

3. Direction finding accuracy (standard signal source)

Under the condition of detection distance ≥2000 meters, ≤1.5°(RMS);

Under the condition of detection distance ≥5000 meters, ≤2°(RMS);

Under the condition of detection distance ≥10000 meters, ≤3°(RMS).

4. Mobility

Single-person operation, the equipment opening/withdrawing time is not more than 5 minutes.

5. Power supply, power consumption

DC 24V power supply, external AC adapter can be connected; battery continuous power supply is not less than 4h; total power consumption is not more than 100W.

6. Equipment weight

Under the condition of detection distance ≥ 2000 meters, the whole set of equipment ≤ 15kg;

Under the condition of detection distance ≥5000 meters, the whole set of equipment ≤35kg;

Under the condition of detection distance ≥10000 meters, the whole set of equipment is ≤65kg.